Brake fluid - MOTUL RBF 600 FL 0,5L

• Exceeds DOT 5.1 and DOT 3 standards, with different viscosity at -40°C (-40°F).

Extreme heat resistance and stability:

• MOTUL RBF 600 FACTORY LINE's very high boiling point (312°C/594°F) is better than conventional DOT 5.1 silicone-free brake fluids (260°C/500°F min) and DOT 4 (230°C/446°F ), and therefore provides effective braking even in extreme conditions.

Effective in the rain:

• MOTUL RBF 600 FACTORY LINE's very high wet boiling point (204°C/399°F) is better than that of conventional DOT 5.1 non-silicone-based brake fluids (180°C/356°F min) and DOT 4 (155°C/311°F min °F), allowing the braking system to remain effective in the rain. DOT 3, DOT 4, and DOT 5.1 brake fluids have the ability to absorb water in the air, which affects their temperature and increases the risk of "steam chamber" phenomena.
• The wet boiling point is measured by moistening the product with 3% water.

RECOMMENDATIONS

• Avoid mixing with lower-performance polyglycol-based brake fluids.
• Do not mix with silicone (DOT 5 silicone base) or mineral fluids (LHM).
• Store brake fluid in its original, tightly closed container to prevent moisture absorption. Aggressive chemical product when in contact with hands, paint, or varnish.
• In case of contact with skin, rinse thoroughly with water.